Pack a parcel for courier in a new, rigid corrugated box that is strong enough for the weight, with the contents wrapped individually and every gap filled so nothing can move when you shake it. Seal every seam with proper parcel tape 4 to 5 cm wide, put one clear label on the top, and put a copy of the address inside.
That’s how to pack a parcel for courier in two sentences. The rest of this guide is the detail behind each step: why parcel networks are hard on boxes, which box to choose for a 3 kg order and which for a 15 kg one, what fillers actually work, and the places where Royal Mail and Parcelforce give different advice. If your goods are going in a same-day courier van rather than through a sorting hub, the packing can be lighter in places, and we cover where.
What happens to a box inside a parcel network
Most packing mistakes come from picturing one driver carrying your box carefully from door to door. In a parcel network, that’s not what happens. A box is collected, tipped into a cage or a van with dozens of others, unloaded at a hub, run along conveyors, sorted by machine, loaded again, and then carried to the door by a different driver. On a longer route it can go through that cycle more than once.
So the box has to cope with three things you don’t control. It will be stacked, possibly under something heavier. It will be dropped and bumped, often on a corner. And it will travel in whatever orientation the network puts it in. Parcelforce says plainly in its packaging guidelines that it does not guarantee the orientation of items, and that writing “This way up” on the box will not keep it that way.
Machines matter too. Parcelforce lists the items it handles by hand rather than by machine: irregular shapes, items with uneven weight or empty spaces inside, anything longer than 1.1 metres, and anything whose second-longest side is over 0.7 metres. A tidy, rigid, rectangular box goes through the system faster and with less handling than an odd-shaped bundle.
How to pack a parcel for courier, step by step
Here is the order we’d work in, using a worked example: a small online shop sending 12 kg of hardback books and a boxed ceramic vase to one customer.
- Weigh the goods first. At 12 kg plus a fragile item, this needs a double-walled box, not a single-walled one.
- Pick a box with a little room to spare. Enough for padding on every side of the vase, not so much that the books can slide.
- Tape the base before you fill it. Run tape along the centre join and across both edges of the bottom flaps.
- Put the heavy items in first, flat on the base. The books go in as a solid block at the bottom.
- Wrap the fragile item on its own. The vase goes in its own small box with padding, then into the middle of the outer box, away from the walls.
- Fill every gap. Close the flaps and give it a gentle shake. If anything moves or rattles, open it and add more filler.
- Put a slip inside with the delivery address, your return address and a phone number.
- Seal and label. Tape every seam, then stick one clear label on the top.
Two of those steps do most of the work. The shake test catches the thing every carrier’s guide warns about: contents moving around inside the box. And taping the base before filling stops the classic failure of a heavy box, where the bottom flaps open as someone lifts it.
If the books and the vase were going in two boxes rather than one, don’t tape the boxes together. Parcelforce says never to strap parcels together: either put everything in one box or send them as separate parcels. Our guide to sending multiple parcels to the same address covers when one box, several boxes or a pallet works out best.
Choosing the box: walls, size and wear
The Post Office’s guide on how to pack your parcel recommends corrugated cardboard, and double- or triple-walled boxes for fragile items or anything of 10 kg or more. You can tell the difference by looking at the cut edge: single-wall board has one wavy layer between two flat sheets, double-wall has two.
As a rough guide to what that means in practice:
| What you’re sending | Box to use | Why |
|---|---|---|
| Clothing, soft goods, under about 2 kg | Single-wall box or padded mailer | Nothing inside can break, and a mailer saves space |
| Books, tools, stock up to 10 kg | Single-wall box, well filled | Strong enough if the contents can’t shift |
| Anything 10 kg or more | Double- or triple-wall box | The Post Office threshold for heavy parcels |
| Glass, ceramics, electronics | Double-wall outer box, item in its own inner box | Two layers between the item and a dropped corner |
| Laptops and tablets | Rigid box with thick padding | Parcelforce says never use soft cases or padded bags |
Size matters as much as strength. A box that’s too big leaves space for the contents to move and dents under the weight of whatever is stacked on it. A box that’s too small has no room for padding, so every knock goes straight through to the goods. Aim for around 5 cm of padding between a fragile item and each wall, which is the gap the Post Office suggests.
Be careful with second-hand boxes. Royal Mail’s guide to packaging heavy items warns that an old delivery box can be weakened without showing it, and says that if in doubt you should buy a new one. Parcelforce goes further and asks for a new rigid box. If you do reuse a box, check the corners and flaps for crushing, and remove or cover every old label and barcode so a scanner can’t read the wrong one.
What to fill the box with, and what not to
This is where the carriers’ own advice doesn’t quite agree, and it’s worth knowing why.
Royal Mail recommends wrapping heavy items in bubble wrap, using cardboard dividers between items and topping up with polystyrene chips. It advises against loose balls of newspaper, which crush flat, and against small air pillows, which tend to pop under the weight of heavy items. Parcelforce, on the other hand, says bubble wrap is only good for protecting the surface of large items, and that large or electrical goods need thick, rigid protection such as polystyrene surrounds or strong air bags.
They are both right for the parcels they are describing. Bubble wrap is fine for stopping scratches and soaking up small knocks on light items. It does very little to stop a heavy object hitting the side of the box when it’s dropped. The heavier the item, the stiffer the padding needs to be.
A practical way to choose:
- Light items (under about 2 kg): bubble wrap around the item, crumpled kraft paper or paper fill in the gaps.
- Several items in one box: wrap each one separately and use cardboard dividers so they can’t touch each other.
- Heavy or electrical items: rigid supports such as moulded polystyrene, foam corner blocks or the original packaging inserts if you still have them.
- Loose gaps at the top: polystyrene chips or paper, packed firmly enough that the lid doesn’t sag when you press it.
Don’t overfill. A box packed so tight that the sides bulge can burst along a seam, and Royal Mail makes the same point: snug, not rigidly jammed. For high-value or very delicate goods, our guide to sending fragile and high-value goods goes into double-boxing in more detail.
Sealing: parcel tape, not string or staples
The Post Office recommends strong tape 4 to 5 cm wide, such as vinyl or nylon tape, along every edge and opening. Thin household tape, masking tape and string are all on its list of things to avoid, along with staples.
The usual method is an “H” pattern on the top and the bottom: one strip along the centre join where the flaps meet, then a strip across each end, folding down the sides by a few centimetres. For anything heavy, add a second strip along the centre join on the base. It costs pennies and it’s the bottom of the box that takes the strain every time someone lifts it.
Some things should never go on the outside of a box. Parcelforce says string, plastic strapping, shrink wrap and bubble wrap on the outside can get caught in its sorting machines. The Post Office adds that bin liners and cloth bags offer no protection at all. If you’ve used staples or there’s a metal fastening on the box, flatten it and tape over it, because a sharp point can tear the label or another customer’s parcel.
Labels, and why “Fragile” doesn’t help much
A box can be perfectly packed and still go astray if the label is poor. Put the label flat on the top face, the largest one, with no tape over the barcode and nothing folded around an edge. If you’re reusing a box, the old labels have to go first.
Write your return address on the outside too, and put a slip inside with both addresses and a phone number. Royal Mail and Parcelforce both suggest this. If the outer label is torn off in transit, the slip inside is the only way the parcel gets to anyone.
As for “Fragile” stickers and arrows: they don’t hurt, but they don’t do much. Parcelforce says directly that a fragile label is not a substitute for proper packaging, and that it can’t promise to keep a parcel the right way up. In a network, your box is one of thousands on a belt. Pack it as if it will be turned over, because it might be.
Packing also matters if something goes wrong. Carriers can refuse compensation when packaging wasn’t up to the job: Parcelforce says any compensation cover may be void if the packaging was insufficient and the goods are damaged. Our explainer on goods in transit insurance covers how cover and claims work for businesses.
Packing for a dedicated van vs a network
Everything above assumes your box goes through a parcel network. A dedicated courier is different. When you book a van courier, your goods are loaded at collection and stay in that vehicle until they’re delivered. There’s no hub, no conveyor and no second driver.
That changes some of the advice:
- Items can travel upright if the driver loads them that way and they’re secured in the van. In a network you can’t count on that.
- Odd shapes are less of a problem. A tall lamp, a rolled rug or a framed print doesn’t need to fit a sorting machine, only the van.
- There are far fewer drops, because the goods are lifted at the start and the end of the trip and not in between.
It doesn’t remove the need to pack properly. Vans still brake, corner and go over speed bumps, and a box with loose contents will still rattle itself to pieces over a 90-minute drive. A sensible middle ground for a dedicated van is a sound box, fragile items wrapped, gaps filled, and goods placed so they can be strapped or wedged in place.
For parcels going overnight through a network, the full packing rules apply. Our next-day courier service page explains how those deliveries are handled.
Questions about packing a parcel
Can I reuse an old Amazon or supermarket box?
You can, if it’s still rigid and undamaged. Check the corners and flaps for crushing, and remove or cover every old label and barcode. Royal Mail warns that boxes can be weakened without showing it, so for anything heavy or fragile, a new double-wall box is the safer choice. Remember that some carriers, Parcelforce among them, ask for a new box.
Is bubble wrap enough on its own?
For light, sturdy items, usually yes. For anything heavy or easily broken, no. Parcelforce describes bubble wrap as suitable only for protecting the surface of large items, and asks for rigid protection such as polystyrene surrounds for electrical goods. Use bubble wrap to stop scratches, and something stiffer to stop impacts.
How much empty space should there be in the box?
None that the contents can move into. Leave around 5 cm between fragile items and each side of the box, as the Post Office suggests, then fill that gap with padding. Close the box and shake it gently. If you can hear or feel anything moving, add more filler before sealing.
Should I write “Fragile” on the box?
You can, but don’t rely on it. Parcelforce says a fragile label is not a substitute for adequate packaging, and that it doesn’t guarantee which way up a parcel travels. Pack the box so it survives being dropped on a corner or turned over, and treat any sticker as a bonus.
Are there things I can’t send however well I pack them?
Yes. Some goods are banned or restricted by carriers whatever the packaging, including some batteries, aerosols and flammable items. Check before you pack: our list of what you can’t send by courier sets out the main ones and the rules for each.
In short
Use a new or sound corrugated box sized to the goods, double-walled for anything fragile or over 10 kg. Wrap each item, keep fragile items about 5 cm from the walls, and fill every gap until nothing moves when you shake it. Seal every seam with 4 to 5 cm parcel tape, put one clear label on top and an address slip inside. Then assume the box will be stacked, dropped and turned over, because in a parcel network it probably will be.
If the goods are awkward, valuable or too much to trust to a sorting hub, a dedicated van is the alternative. Get a quote with the sizes and weights and we’ll tell you which vehicle fits.
